< Homepage              44 Aldwick Road, Bognor Regis. West Sussex PO21 2PN    Landline 01243 864692

 
Final prices subject to confirmation with order  

POWER AMPLIFIERS
(a few examples)

There are many power amplifiers out there from great value to great big price tags! These are a few examples.
If you need a weatherproof smash-proof amplifier and have thousands to spend we can arrange that too... call us!
     
 
click to view big QTX PRO Series Power Amplifiers
PRO240 Power Amplifier úCall
PRO480 Power Amplifier úCall
PRO600 Power AmplifierúCall
PRO1000 Power Amplifier úCall

Power supply

230Vac, 50Hz (IEC)

Frequency response

20Hz - 20kHz

Input connectors

RCA Phono/6.3mm jack

Input sensitivity

775mV, 10k ohms

Minimum impedance

4 ohms

Output connectors

SPK/Jack/Binding Post

S/N ratio

>98dB

THD

<0.5%

A range of stereo power amplifiers
designed and built to exacting standards
that are ideal for mobile DJs and installations.
  • Volume control for each channel
  • Attractive blue LED output level indicators
  • Toroidal transformer
  • Fan cooled
  • 2U 19" rack mountable
   
   
úCall    SEE MANUAL

click to view big


 

 

click to view big

Stereo Power Amplifier 550W + 550W
plus 1000W Sub all at rms

Power RMS 2 x 550W + 1000W
Fuse rating F15A
Power rms - Not peak!
@ 8 Ohms 350 + 350 + 700W (sub) Power rms
@ 4 Ohms 550 + 550 + 1000W (sub)
Weight 23kg

P-SERIES STEREO + SUB POWER AMPLIFIER

2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with integral active crossover. Designed as a cost effective and efficient solution for bi-amplified sound systems where subs and top cabinets are run together from this single amplifier.

Stereo full range output Mono summed sub output (can be full range) Active crossover with variable frequency

Power supply 240Vac, 50Hz (IEC) Input impedance (balanced/unbalanced) 40k Ohms / 20k Ohms Controls 3 x channel level + crossover frequency Connections 3 x XLRF, 3 x jack, 3 x SPK Cut-off frequency 50 - 250Hz (12dB/oct) Damping factor >250 (20-400Hz @ 8 Ohms) Slew rate 6.5V/us Frequency response 10Hz - 50kHz (-2dB) THD +N 0.04% Signal to noise ratio 86dB Low-cut filter 30Hz fixed (12dB/oct) Dimensions 483 x 439 x 88mm

     
   
 
click to view big Studiomaster 1000watt 2U   úCall

Click pic to see bigger view with specs

The SX2 range are rugged light weight amplifiers capable of producing quality sound at all power levels. There are three models in the range, all occupy only 2 rack spaces and are forced cooled via a thermally controlled fan.

There are 3 modes of operation available stereo, mono or bridged and the input sensitivity can be trimmed by +-3dB for system matching. The inputs use combined XLR and jack socket combination connectors with a separate link socket to feed additional amplifiers. The outputs use industry standard four pole connectors with binding posts giving total flexibility. Front panel status LEDs provide visual indication of signal levels, BRIDGED mode and POWER.

   
 
click to view big Citronic PLX Power Amplifiers
PLX 3600 - úCall
PLX 2800 - úCall
PLX 2000 - úCall

PLX-SERIES POWER AMPLIFIERS 19" rackmount 2U power amplifiers with dual fan cooling and class H architecture for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. High power output stable down to 2 Ohms load per side can also be bridged mono to 4 Ohms. Switchable ground lift, bridge mode and clip limiter.

  • Bridge mode for high power mono operation
  • Output stable down to 2 Ohms
  • Removable handles for low profile install
  • Switchable clip limiter
   
     
   
e&oe    

pages can be subject to development revision